Rotor-Interface: Yaesu GS23 or compatibleġ) Software does not use position-information available from the interfaceĢ) Not compatible.Orbitron is a software solution designed to help you track satellites and view their positions at any time, while also providing a bunch of other useful details. There is nothing to be set regarding the RS232-status-lines (RTS/CTS/DSR/DTR)īaud: 9600, Data: 8, Parity: N, Stop Bits: 1Ģ) (doesn't send CR after message in Yeasu-mode)
Word Length (Data Bits): 8 / Stop Bits: 1 / Parity: None Whenever there are settings to be made regarding the COM-Port parameters, it is always: Both, baudrate and protocol must be configured with the service-tool according to the settings shown in the table below. It has a configurable baudrate (4800 to 38400 Baud) and various protocols can be selected (Yaesu GS232A and GS232B (including Dual-Azimuth by VE2DX), Hygain DCU-1). Both, baudrate and protocol must be configured with the service-tool according to the settings shown in the table below.ĮRC-M is a 2-axis interface for azimuth&elevation-antennas or for azimuth-only-antennas. It has a configurable baudrate (4800 to 38400 Baud) and various protocols can be selected (Yaesu GS232A and GS232B, Hygain DCU-1). The protocol must be configured with the service-tool according to the settings shown in the table below.ĮRC VERSION 4 is a 1-axis interface for azimuth-antennas. They have a fixed baudrate of 9600 Baud and the protocol can be selected between Yaesu GS232A and GS232B. It has a fixed baudrate of 4800 Baud and understands a subset of the Hygain DCU-1 and Yaesu GS232B-protocol without any additional settings needed.ĮRC-3D (obsolete) and ERC-R (obsolete) are 2-axis interfaces for azimuth&elevation-antennas or for azimuth-only-antennas.
Orbitron) are supported by PstRotator by YO3DMU.ĮRC VERSION 2,3 (obsolete) is a 1-axis interface for azimuth-antennas. This guide is not complete and will be filled with additional data.Īdditional programs, especially if they don't have own COM-port drivers for rotor-controlling (e.g. It will help you to find the right settings in your software and also tells you how to setup the configuration of an ERC-Interface (ERC, ERC-3D, ERC-R, ERC-M). This guide will tell, if our interfaces are compatible with your favourite software.
0 kommentar(er)
